Search
Filters
Close
Sắp xếp theo
Hiển thị
 

FS-PP

FS-PP

FS-PC

FS-PC

FSMG

Flexible Coupling – Oldham coupling with aluminum bronze spacer - Set screw Offset of angular, parallel, or axial deviation are individual allowed value, so couple reasons of axial offset appearing at same time would reduce the unit allowable value. Suit for high wrench torque, high rotation. In case of parallel deviation over 0.1, abrasion of the insert is direct ration to load torque, offset, and rotation numbers. Available options for key way per inner diameter are bigger than 6mm.

FSCP

Flexible Coupling – Oldham coupling with carbon resin spacer - Clamping screw Operating temperature: -40oC~90oC. Offset of angular, parallel, or axial deviation are individual allowed value, so couple reasons of axial offset appearing at same time would reduce the unit allowable value. FSCP lock torque of clamping screw is 5.4 (N m) based on shaft dia (Ød1, Ød2) over Ø16. Available options for key way per inner diameter is bigger than 6mm. (Refer to FS-PC)

FSCG

Flexible Coupling – Oldham coupling with aluminum bronze spacer - Clamping screw Offset of angular, parallel, or axial deviation are individual allowed value, so couple reasons of axial offset appearing at same time would reduce the unit allowable value. Suit for high wrench torque, high rotation. In case of parallel deviation over 0.1, abrasion of the insert is direct ration to load torque, offset, and rotation numbers. Available options for key way per inner diameter are bigger than 6mm.

FA-PG

Flexible Coupling – Oldham coupling with black polyacetel(POM) Spacer - Set screw

FA-PB

Flexible Coupling – Oldham coupling with black polyacetel(POM) Spacer - Set screw

FAMN

Flexible Coupling – Oldham coupling with black polyacetel(POM) Spacer - Set screw Operating temperature: -20oC~80oC. Offset of angular, parallel, or axial deviation are individual allowed value, so couple reasons of axial offset appearing at same time would reduce the unit allowable value.

FAMJ

Flexible Coupling – Oldham coupling with black polyacetel(POM) Spacer - Set screw Operating temperature: -20oC~80oC. Offset of angular, parallel, or axial deviation are individual allowed value, so couple reasons of axial offset appearing at same time would reduce the unit allowable value. Available options for key way per inner diameter is bigger than 6mm. (Refer to FS-PP)

FACU

Flexible Coupling – Oldham coupling with aluminum Spacer - Clamping screw Offset of angular, parallel, or axial deviation are individual allowed value, so couple reasons of axial offset appearing at same time would reduce the unit allowable value. Suitable applied for high torque rigidity and low vibration needs.

FACP-S

Flexible Coupling – Oldham coupling with black polyacetel(POM) Spacer - Clamping screw – Short type Operating temperature: -20oC~80oC. Offset of angular, parallel, or axial deviation are individual allowed value, so couple reasons of axial offset appearing at same time would reduce the unit allowable value.

FACP-L

Flexible Coupling – Oldham coupling with black polyacetel(POM) Spacer - Clamping screw – Long type Operating temperature: -20oC~80oC. Offset of angular, parallel, or axial deviation are individual allowed value, so couple reasons of axial offset appearing at same time would reduce the unit allowable value.

FACJ

Flexible Coupling – Oldham coupling with black polyacetel(POM) Spacer - Clamping screw Operating temperature: -20oC~80oC Offset of angular, parallel, or axial deviation are individual allowed value, so couple reasons of axial offset appearing at same time would reduce the unit allowable value. Select bigger lock torque of clamping screw than listed values on catalogs when shaft diameter is too small. List torque tightness values are only for general standard. Available options for key way per inner diameter is bigger than 6mm. (Refer to FS-PP)

FSMB

Flexible Coupling – Full stainless steel bellows coupling - Set screw Offset of angular, parallel, or axial deviation are individual allowed value, so couple reasons of axial offset appearing at same time would reduce the unit allowable value.

FSCB

Flexible Coupling – Full stainless steel bellows coupling - Clamping screw Offset of angular, parallel, or axial deviation are individual allowed value, so couple reasons of axial offset appearing at same time would reduce the unit allowable value.
 

FAMB

Flexible Coupling – Aluminum with Phosphor bronze bellows coupling - Set screw Offset of angular, parallel, or axial deviation are individual allowed value, so couple reasons of axial offset appearing at same time would reduce the unit allowable value.

FACB

Flexible Coupling – Aluminum with Phosphor bronze bellows coupling - Clamping screw Offset of angular, parallel, or axial deviation are individual allowed value, so couple reasons of axial offset appearing at same time would reduce the unit allowable value.

FACT-S

Flexible Coupling – Aluminum double disk coupling – Clamping screw – Short type Hard torque load, high torque rigidity and excellent sensibility. Zero backlash. Miniature coupling has short length. Dual stainless steel disk to correct angular and axial deviation. No correction for radial deviation. Clockwise character is exactly the same as anti-clockwise one. Free maintenance, oil-resist and anti-corrosiveness. FACH-S can’t allow axial deviation caused by offset. Offset, deflection, shaft deviation are individual allowed value

FACT-L

Flexible Coupling – Aluminum double disk coupling – Clamping screw – Long type High wrench torque load, high wrench torque rigidity capacity and excellent sensibility. Zero backlash. Dual stainless steel rings to correct radial, angular and axial deviation. Clockwise character is exactly the same as anti-clockwise one. Free maintenance, oil-resist and anti-corrosiveness. Offset of angular, parallel, or axial deviation are individual allowed value, so couple reasons of axial offset appearing at same time would reduce the unit allowable value.

FACH-S

Flexible Coupling – Aluminum double disk coupling – Clamping screw – Short type Hard torque load, high torque rigidity and excellent sensibility. Zero backlash. Miniature coupling has short length. Dual stainless steel disk to correct angular and axial deviation. No correction for radial deviation. Clockwise character is exactly the same as anti-clockwise one. Free maintenance, oil-resist and anti-corrosiveness. FACH-S can’t allow axial deviation caused by offset. Offset, deflection, shaft deviation are individual allowed value

01652.797.655