Search
Filters
Close
AR Series - Standard AR Series - Standard ★ Guide-Deep Groove Ball Bearing, It enables the bearings to accommodate radial and axial loads in both directions to reach high precision and high speed- revolving.
★ Transmission parts-Warm & Warm Gear, It transmits through the gear and is usually used in Reducer.
★ Material-Aluminum Alloy
S000233 Giai đoạn định vị cơ giới tiêu chuẩn Số lượng: 0 Set

AR Series - Standard

★ Guide-Deep Groove Ball Bearing, It enables the bearings to accommodate radial and axial loads in both directions to reach high precision and high speed- revolving.
★ Transmission parts-Warm & Warm Gear, It transmits through the gear and is usually used in Reducer.
★ Material-Aluminum Alloy

 Update:2018.05.29

Model No. AR39-A3NN-ND AR59-A3NN-ND AR80-A3NN-ND AR100-A3NN-ND
Table Size Ø39 mm Ø59 mm Ø80 mm Ø100 mm
Travel Stroke 360°
Drive Type Worm & worm gear (Ratio1/120) Worm & worm gear (Ratio 1/180) Worm & worm gear (Ratio 1/180) Worm & worm gear (Ratio1/144)
Rail Assembled ball bearing Crossed-roller bearing
Main Unit Weight 0.4 Kg 0.6 Kg 0.8 Kg 1.2 Kg
Resolution (Pulse) 0.015° / 0.0075° 0.01° / 0.005° 0.0125° / 0.00625°
Maximum Speed (Full Step) 25° / sec 15° / sec 25° / sec
Positioning Precision 0.01°
Repeatability Precision ±0.05°
Load Capacity 4 Kgf 20 Kgf
Missed Step 0.1°
Parallelism 50 μm 

 

System Configuration Diagram

♦   For detailed specifications, please read the description for the stage and connecting cable.

♦   For the selection of driver, please refer to the cross-reference table for the motor/driver of the standard motorized stage or the GMT motor and driver catalogue.

♦   The most preferred driver is recommended to be specified by GMT as considerations. For different needs, please choose the suitable driver based on real functional needs.

 

Axis Definition

GMT has defined different axis as the following figuration according to the movement direction:

Horizontal movement direction is X and Y axis.

Vertical movement direction is Z axis.

Movement around X, Y, Z axis is defined to α axis, β axis, and θ axis.

Green arrows present the specified axis movement direction.

 

Motor/driver

  Ý kiến bạn đọc

01652.797.655