AYG7-VMC – Precision
Liên hệ
★Ball screw.
★Transmission position: central
★High rigidity.
★Durable.
★This product pic. shows as AYG6-75VMC-2PR-CD.
|
Model No. |
AYG7-70VMC-2PR-CD |
AYG7-96VMC-2PR-CD |
||
|
Mechanical Spec. |
Table Size (mm) |
70 X 70 | ||
|
Travel Stroke (°) |
Upper Axis：± 6
Lower Axis：± 5 |
Upper Axis：± 5
Lower Axis：± 4 |
||
|
Drive Type |
Ball Screw | |||
|
Rail |
Crossed Roller Guiding | |||
|
Stage Material / Surface Treatment |
Aluminum Alloy / Black Anodized | |||
|
Main Unit Weight (Kg) |
1.2 | |||
|
Coupling |
FAMMS12-3*5 | |||
|
Accuracy Level |
P：Precision grade | |||
|
Wiring Method |
R：Right Wiring / L：Left Wiring | |||
|
Precision Spec. |
Resolution (Pulse) (°) |
Upper Axis：≒ 0.0015 (Full)；≒ 0.00075 (Half)
Lower Axis：≒ 0.0011 (Full)；≒ 0.00055 (Half) |
Upper Axis：≒ 0.0011 (Full)；≒ 0.00055 (Half)
Lower Axis：≒ 0.0009 (Full)；≒ 0.00045 (Half) |
|
|
Max. Speed (Full Step) (° / sec) |
Upper Axis：7.5
Lower Axis：5.6 |
Upper Axis：5.6
Lower Axis：4.5 |
||
|
Repeatability Precision (°) |
Follow each singgle axis precision | |||
|
Load Capacity (Kgf) |
4 | |||
|
Missed Step (°) |
< 0.003 | |||
|
Dynamic Straightness (mm) |
70 ± 0.2 | 96 ± 0.2 | ||
|
Dynamic Parallelism (mm) |
N / A | |||
|
Electrical Spec. |
Motor |
Type / Shaft Numbers |
5-phase stepper / ☐ 28 double shafts | |
|
Brand / Model |
SANYO / SH5281-7211 | |||
|
Driver Brand / Model |
Please refer to reference table | |||
|
Connector |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS | ||
|
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) | |||
|
Sensor |
Origin Sensor |
Photoelectric sensor GMT-sensor | ||
|
Limit Sensor |
||||
|
Origin Approximation Sensor |
N / A | |||
|
Power Voltage |
24V ± 10% | |||
|
Control Output |
NPN open collector output under 24V 8mA | |||
|
Output Control |
Testing (sensing)：output transistor OFF (closed) | |||
| System Configuration Diagram |
| ♦ For selection of the drivers preferred, please refer to the reference table or the catalogue of Motor・Driver.
♦ All of the drivers chosed are the specification of GMT preferred. For different needs, please choose the suitable drivers according to real functional needs.
|
| Axis Definition |
| GMT has defined different axis as the following figuration according to the movement direction:
Horizontal movement direction is X and Y axis. Vertical movement direction is Z axis. Movement around X, Y, Z axis is defined to α axis, β axis, and θ axis. Green arrows present the specified axis movement direction.
|
Motor・driver Reference Table |
 |
|
|
Be the first to review “AYG7-VMC – Precision”
Related products
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Reviews
There are no reviews yet.