Update:2018.06.20
Model no. | Table size (mm) | Travel stroke (mm) | Minimum | Straightness Accuracy (μm) | Loading (kgf) | Weight |
MCM-44 | 40x40 | ±10 | 0.1 mm / | 30 | 2 | 0.5 |
MCM-44L | 40x40 | X ±10 ; Z +10 | 0.1 mm / | 30 | 2 | 0.47 |
MCM-44W | 40x40 | ±10 | 0.1 mm / | 30 | 2 | 0.55 |
MCM-44WL | 40x40 | X ±10 ; Z +10 | 0.1 mm / | 30 | 2 | 0.52 |
MCM-46 | 40x60 | ±15 | 0.1 mm / | 30 | 2 | 0.67 |
MCM-46L | 40x60 | X ±15 ; Z +15 | 0.1 mm / | 30 | 2 | 0.64 |
MCM-46W | 40x60 | ±15 | 0.1 mm / | 30 | 2 | 0.72 |
MCM-46WL | 40x60 | X ±15 ; Z +15 | 0.1 mm / | 30 | 2 | 0.68 |
MCM-49 | 40x90 | ±30 | 0.1 mm / | 30 | 2 | 0.87 |
MCM-49L | 40x90 | X ±30 ; Z +30 | 0.1 mm / | 30 | 2 | 0.85 |
MCM-49W | 40x90 | ±30 | 0.1 mm / | 30 | 2 | 0.92 |
MCM-49WL | 40x90 | X ±30 ; Z +30 | 0.1 mm / | 30 | 2 | 0.89 |
MCM-41 | 40x140 | ±50 | 0.1 mm / | 30 | 2 | 1.23 |
MCM-41L | 40x140 | X ±50 ; Z +50 | 0.1 mm / | 30 | 2 | 1.18 |
MCM-41W | 40x140 | ±50 | 0.1 mm / | 30 | 2 | 1.28 |
MCM-41WL | 40x140 | X ±50 ; Z +50 | 0.1 mm / | 30 | 2 | 1.24 |
The Main Feeding Mode of Mini Stages | |||
Main Feeding Mode | Characteristics | A Crcle Movement of Handle Rotation | Applied for Guiding Device |
●Suitable for high speed mass feed. ●Not suitable for precise positioning.
| 17~20 mm | ● Dovetail | |
Feeding Screw
| ● Use precise threadscrew pitch to proceed simple precise moving. | 0.25~1 mm | ● Dovetail ● Crossed roller ●Linear ball bearing |
Micrometer Head | ● Precise Reading Unit: 0.01mm is suitable for precise tuning. | 0.5 mm | ●Dovetail ● Crossed roller ● Linear ball bearing |
● Divided into rough moving (general feeding) and slight moving (micro feeding) use. ● It’s a special feeding device and a bit costly. ● Differential motion structure for slightly transmission. | Coarse tuning:0.5 mm Fine tuning:0.025mm | ●Linear ball bearing ● Crossed roller |
Feeding Position |
|
Axis | XZ Axis |
Guide device | Dovetail stage |
Transmission Parts | Rack and pinion |
Material | Aluminum Alloy |
Model No. | MCM |
Reader Comments