| Model | |||
| Specification | Travel Stroke (mm) | Accuracy (mm) | Minimum Resolution |
| PS1R □—07 | 0-7 | 0.03 | 0.1mm / Vernier |
| PS1R □—13 | 0-13 | 0.03 | 0.1mm / Vernier |
| PS1R □—25 | 0-25 | 0.03 | 0.1mm / Vernier |
| PS2R □—07 | 0-7 | 0.03 | 0.1mm / Vernier |
| PS2R □—13 | 0-13 | 0.03 | 0.1mm / Vernier |
| PS2R □—25 | 0-25 | 0.03 | 0.1mm / Vernier |
| PS1M □—07 | 0-7 | 0.03 | 0.1mm / Vernier |
| PS1M □—13 | 0-13 | 0.03 | 0.1mm / Vernier |
| PS1M □—25 | 0-25 | 0.03 | 0.1mm / Vernier |
| PS2M □—07 | 0-7 | 0.03 | 0.1mm / Vernier |
| PS2M □—13 | 0-13 | 0.03 | 0.1mm / Vernier |
| PS2M □—25 | 0-25 | 0.03 | 0.1mm / Vernier |
| Characteristic of Different Guiding Type | ||||||
| Slide Way | Structure | Characteristic | Application | Moving Accuracy | Load Capacity | Rigidity |
| Crossed Roller |  |
The slide rail consists of two hardened V-grooves with fine ground surface and crossed roller bearings. | This is sutable for precise movement device in high accuracy and high capacity, optical instruments in precise gauging and fine tuning, various machine tools, gauging instruments, precise positioning and quantitative movment…etc. | Excellent | Excellent | Excellent |
| Linear Ball |  |
Slide way and body is in one unit, and Gothic arc-groove ground precisely to meet requirement of high parallism and high flatness. Gothic arc-groove formed by dual arc-grooves individually on upper and lower rails of body. Ball moving in single groove is structured by 2 points – contact, and total 4 contact points in dual arc-groove to form strong rail construction. In case of rails of SUS-STAGE is to set ball assembly in arc-groove to save traditional adjustment and revision time. In addition, without adjustment screw would save accuracy problem and maintenance time caused by loosen screw, and cheaper as well. | Applied to precise positioning device in high accuracy and mid-capacity, product and design integrated system, optical experiment, precise transportation and fine tuning mechanism application. | Excellent | Good | Good |
| Dovetail Type |
 |
Dovetail Plane-Pinion and Rack (Main material: Brass or aluminum alloy) GMT supplies proper models suitable to be equipped to various modules such as small, coarge or fine turn, larger size for installation etc. Driven-adjustment mode is rack and pinion. Apply to higher working frequency, requirement of faster movement and larger stroke. Screw-Driven Plane (main material: brass)Prepared by easy-carry standard and slide type fit for inner set mode. Driven adjustment mode is screw shaft mode. Apply to lower frequency, fine tuning environment. |
It is applied to optical instruments and equipments, sampler, detecting device, semi-conductor manufacturing equipment, test machine, microscope, transiting machine, machinig center, medical instrument, printer and others. | Fair | Good | Excellent |
| XY Simplified Stage |  |
Round sticks on two sides are applied to support middle transmission construction: Feeding Screw Type To move stage table by push-and-press from screws, and to restrain gap produced by using springs tensile force. It’s the type suitable for light loading and accuracy feeding application. Threading Type The stage table is moved by thread which has been crossed through to the table. The stage is suitable for heavier loading compared to feeding screw with spring transmission type. |
The product is applied to fixture, camera, sensor, nozzle, and guiding groove of the conveyor, those equipments don’t require high accuracy adjustment. | Fair | Fair | Fair |
| The Main Feeding Mode of Mini Stages | |||
| Main Feeding Mode | Characteristics | A Crcle Movement of Handle Rotation | Applied for Guiding Device |
Rack and Pinion |
●Suitable for high speed mass feed. ●Not suitable for precise positioning.
|
17~20 mm | ● Dovetail |
| Feeding Screw
|
● Use precise threadscrew pitch to proceed simple precise moving. | 0.25~1 mm | ● Dovetail
● Crossed roller ●Linear ball bearing |
| Micrometer Head
|
● Precise Reading Unit: 0.01mm is suitable for precise tuning. | 0.5 mm | ●Dovetail
● Crossed roller ● Linear ball bearing |
Rough Slightly Moving Micrometer Head |
● Divided into rough moving (general feeding) and slight moving (micro feeding) use.
● It’s a special feeding device and a bit costly. ● Differential motion structure for slightly transmission. |
Coarse tuning：0.5 mm
Fine tuning：0.025mm |
●Linear ball bearing
● Crossed roller |
Feeding Position |
|
Be the first to review “Feeding Screw”
Related products
Reviews
There are no reviews yet.