ARG85 – Hollow Rotary Stage
- ★Available for large withstand large inertia.
- ★Hollow structure for wiring arrangement.
- ★Suspended installation available.
- ★High rigidity, and High load capacity.
- ★360° travel Stroke.
|
Stepper / Servo Motor |
|||
|
Model No. |
ARG85 |
||
|
Mechanical Spec. |
Base Size (mm) |
85 X 120 | |
|
Table Size (mm) |
Ø 80 | ||
|
Hollow Size (mm) |
Ø 21 | ||
|
Travel Stroke |
360 ° | ||
|
Drive Type |
Gear (Reduction Ratio 1 / 5) R05 | ||
|
Rail |
Crossed-Roller Guiding | ||
|
Stage Material / Surface Treatment |
Aluminum Alloy (Steel Countertops) / Black Anodized | ||
|
Torque (N・m) |
21 | ||
|
Moment of Inertia (Kg・m2) |
2591 X 10-6 | ||
|
Max. Speed (rpm) |
200 | ||
|
Axial Capacity (N) |
1170 | ||
|
Deviaition Capacity (N・m) |
29 | ||
|
Weight (Kg) |
1.74 | ||
|
Precision Spec. |
Accuracy Level |
P：Precision Grade | |
|
Positioning Precision |
4′ (0.0667 °) | ||
|
Repeatability Precision |
± 15″ (± 0.004 °) | ||
|
Missed Step |
4′ (0.0667 °) | ||
|
Parallelism (μm) |
30 | ||
|
Dynamic Straightness (μm) |
8 | ||
|
Dynamic Parallelism (μm) |
8 | ||
|
Equipped with Motor |
Servo Motor |
Representation |
E46S08 (Addition Purchase) |
|
Reference Watts (W) |
50 & 100 | ||
|
Installation Dimensions |
Moment of Installation：P . C . D = Ø 46
Suitable Shaft Diameter Ø 8 |
||
|
Stepper Motor |
Representation |
T31S05 (Addition Purchase) | |
|
Reference Watts (W) |
☐42 | ||
|
Installation Dimensions |
Moment of Installation：☐31
Suitable Shaft Diameter 5 |
||
|
Origin Sensing Kit |
Sensor |
Photoelectric Sensor PM-T65 (Addition Purchase) | |
|
Power Voltage |
20V ± 10% | ||
|
Control Output |
NPN Open Collector Output under 20V 50mA | ||
|
Output Control |
Testing (Sensing or not)：Output Transistor OFF (Closed) | ||
|
Shading Panel Beating |
Origin Sensing Interrupt (Addition Purchase) | ||
|
Cable with End of a Thread |
The Length of Cable below 1m：CN14A-C1 (Addition Purchase) | ||
| The Length of Cable below 2m：CN14A-C2 (Addition Purchase) | |||
| The Length of Cable below 3m：CN14A-C3 (Addition Purchase) | |||
| The Length of Cable below 5m：CN14A-C5 (Addition Purchase) | |||
|
Stepper Motor Electrical Spec. |
Open-loop Driver |
☐42，GTR22G-D | |
|
Close-loop Driver |
Q-SERVO (GST-QSD42MR-24CP) | ||
|
Stage Side Connector |
15-Pin male connector D-SUB | ||
|
Controller Side Connector |
15-Pin female connector D-SUB | ||
|
Stepper Motor Origin Sensing Kit |
Sensor |
Photoelectric Sensor PM-T65 (Addition Purchase) | |
|
Power Voltage |
20V ± 10% | ||
|
Control Output |
NPN Open Collector Output under 20V 50mA | ||
|
Output Control |
Testing (Sensing or not)：Output Transistor OFF (Closed) | ||
|
Shading Panel Beating |
Origin Sensing Interrupt (Addition Purchase) | ||
|
Cable with End of a Thread |
The Length of Cable below 1m：CN14A-C1 (Addition Purchase) | ||
| The Length of Cable below 2m：CN14A-C2 (Addition Purchase) | |||
| The Length of Cable below 3m：CN14A-C3 (Addition Purchase) | |||
| The Length of Cable below 5m：CN14A-C5 (Addition Purchase) | |||
|
DC Servo Electrical Spec. |
DC Servo Motor |
50 W |
GSVM-D0BMD5 |
|
100 W |
GSVM-D01MD5 | ||
|
DC Servo Driver |
50 W |
K-SERVO (GSV-DK0BMR-48DP) | |
|
100 W |
K-SERVO (GSV-DK01MR-48DP) | ||
|
Stage Side Connector |
Manufacturer：TE Connectivity
Power cord：172159-1 + 170366-1 (Male end) Encoder cable：172161-1 + 170365-1 (Male end) |
||
|
Controller Side Connector |
Manufacturer：KST
Power cord：E1510-RED (European Terminals) Manufacturer：JST Encoder cable：PHDR-12VS+SPHD-001T-P0.5 (Female end) |
||
|
AC Servo Electrical Spec. |
AC Servo Motor |
100W：GSVM-A01LC4 | |
|
AC Servo Driver |
GSV-KE01MB21CP | ||
|
Stage Side Connector |
Manufacturer：Tyco electronics
Power cord：172167-1 (Male end) Encoder cable：172171-1 (Male end) |
||
|
Controller Side Connector |
Manufacturer：Tyco electronics
Power cord：172159-1 (Female end) Encoder cable：172163-1 (Female end) |
||
|
Servo Motor Origin Sensing Kit |
Sensor |
Photoelectric Sensor PM-T65 (Addition Purchase) | |
|
Power Voltage |
20V ± 10% | ||
|
Control Output |
NPN Open Collector Output under 20V 50mA | ||
|
Output Control |
Testing (Sensing or not)：Output Transistor OFF (Closed) | ||
|
Shading Panel Beating |
Origin Sensing Interrupt (Addition Purchase) | ||
|
Cable with End of a Thread |
The Length of Cable below 1m：CN14A-C1 (Addition Purchase) | ||
| The Length of Cable below 2m：CN14A-C2 (Addition Purchase) | |||
| The Length of Cable below 3m：CN14A-C3 (Addition Purchase) | |||
| The Length of Cable below 5m：CN14A-C5 (Addition Purchase) | |||
Be the first to review “ARG85 – Hollow Rotary Stage”
Related products
Reviews
There are no reviews yet.