Model No. |
AX40-A2PR-CD |
|||
Mechanical Spec. |
Table Size (mm) |
40 X 40 | ||
Travel Stroke (mm) |
15 | |||
Drive Type |
Ball screw Ø6, lead 1mm | |||
Rail |
Anti-creep Crossed-roller Guiding | |||
Stage Material / Surface Treatment |
Aluminum Alloy / Black anodized | |||
Main Unit Weight (Kg) |
0.37 | |||
Coupling |
FAMMS12-3*5 | |||
Accuracy Level |
P:Precision grade | |||
Wiring Method |
R:Right Wiring / L:Left Wiring | |||
Precision Spec. |
Resolution (Pulse) (µm) |
2 (Full) | 1 (Half) | |
Max. Speed (Full Step) (mm / sec) |
10 | |||
Positioning Presion (µm) |
5 | |||
Repeatability Precision (µm) |
± 0.5 | |||
Load Capacity (Kgf) |
6 | |||
Missed Step (µm) |
1 | |||
Parallelism (µm) |
20 | |||
Dynamic Straightness (µm) |
2 | |||
Dynamic Parallelism (µm) |
6.6 | |||
Electrical Spec. |
Motor |
Type / Shaft Numbers |
5-phase stepper / ☐ 28 double shafts | |
Brand / Model |
SANYO / SH5281-7211 | |||
Driver Brand / Model |
Please refer to reference table | |||
Connector |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS | ||
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) | |||
Sensor |
Origin Sensor |
Photoelectric sensor GMT-sensor | ||
Limit Sensor |
||||
Origin Approximation Sensor |
N / A | |||
Power Voltage |
24V ± 10% | |||
Control Output |
NPN open collector output under 24V 8mA | |||
Output Control |
Testing (sensing):output transistor OFF (closed) |
AX40 – Precision
Liên hệ
★Guide-Crossed-roller Guide, In structure, V-groove and crossed roller acquire movement in high accuracy and capacity by linear transmission to act a high precision movement and load capacity performance.
★Transmission Parts-Ball screw, It transmits through the ball involving in the locknut and screw to reach the accuracy and longer operation lifetime.
★Material-Aluminum Alloy
Reviews
There are no reviews yet.