CXS60 – Precision
Liên hệ
★ Guide-Linear ball, Gothic arc-groove formed by dual arc-grooves individually on upper and lower rails of body. Ball moving in single groove is structured by 2 points-contact, and total 4contact points in dual arc-groove to form strong rail constructure.
★ Transmission Parts-Ball screw, It transmits through the ball involving in the locknut and screw to reach the accuracy and longer operation lifetime.
★ Material-Stainless Steel
★This product pic. shows as CXS60-S2PN-CD.
|
Model No. |
CXS6020-S2PN-CD |
CXS6030-S2PN-CD |
CXS6050-S2PN-CD |
||
|
Mechanical Spec. |
Table Size (mm) |
60 X 60 | 60 X 80 | ||
|
Travel Stroke (mm) |
20 | 30 | 50 | ||
|
Drive Type |
Ball screw Ø8, lead 1mm | ||||
|
Rail |
Linear Ball Guiding | ||||
|
Stage Material / Surface Treatment |
S：Stainless Steel / Nickel Plating F：Carbon Steel / Nickel Plating |
||||
|
Main Unit Weight (Kg) |
0.75 | 0.8 | 1.11 | ||
|
Coupling |
FAMCS11.6-5*5 | ||||
|
Accuracy Level |
P：Precision grade | ||||
|
Wiring Method |
N：GMT Standard | ||||
|
Precision Spec. |
Resolution (Pulse) (µm) |
2 (Full) / 1 (Half) | |||
|
Max. Speed (Full Step) (mm / sec) |
20 | ||||
|
Positioning Presion (µm) |
5 | ||||
|
Repeatability Precision (µm) |
± 0.5 | ||||
|
Load Capacity (Kgf) |
7 | ||||
|
Missed Step (µm) |
1 | ||||
|
Parallelism (µm) |
20 | ||||
|
Dynamic Straightness (µm) |
2 | ||||
|
Dynamic Parallelism (µm) |
10 | ||||
|
Electrical Spec. |
Motor |
Type / Shaft Numbers |
5-phase stepper / ☐ 28 double shafts | ||
|
Brand / Model |
SANYO / SH5281-7211 | ||||
|
Driver Brand / Model |
Please refer to reference table | ||||
|
Connector |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS | |||
|
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) | ||||
|
Sensor |
Origin Sensor |
Photoelectric sensor GMT-sensor | |||
|
Limit Sensor |
|||||
|
Origin Approximation Sensor |
N / A | ||||
|
Power Voltage |
24V ± 10% | ||||
|
Control Output |
NPN open collector output under 24V 8mA | ||||
|
Output Control |
Testing (sensing)：output transistor OFF (closed) | ||||
| System Configuration Diagram |
| ♦ For selection of the drivers preferred, please refer to the reference table or the catalogue of Motor・Driver.
♦ All of the drivers chosed are the specification of GMT preferred. For different needs, please choose the suitable drivers according to real functional needs.
|
| Axis Definition |
| GMT has defined different axis as the following figuration according to the movement direction:
Horizontal movement direction is X and Y axis. Vertical movement direction is Z axis. Movement around X, Y, Z axis is defined to α axis, β axis, and θ axis. Green arrows present the specified axis movement direction.
|
Motor・driver Reference Table |
 |
|
|
Be the first to review “CXS60 – Precision”
Related products
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Reviews
There are no reviews yet.