CXZN50 – Precision
Liên hệ
★ Guide- Circular linear ball guiding, Gothic arc-groove formed by dual arc-grooves individually on upper and lower rails of body. Ball moving in single groove is structured by 2 points-contact, and total 4contact points in dual arc-groove to form strong rail constructure.
★ Transmission Parts-Ball screw, It transmits through the ball involving in the locknut and screw to reach the accuracy and longer operation lifetime.
★ Material-Stainless Steel
★This product pic. shows as CXZN60-S2PN-CD.
★ Transmission Parts-Ball screw, It transmits through the ball involving in the locknut and screw to reach the accuracy and longer operation lifetime.
★ Material-Stainless Steel
★This product pic. shows as CXZN60-S2PN-CD.
SKU: CXZN5050-S2PN-CD
|
Model No. |
CXZN5050-S2PN-CD-P1 |
CXZN5050-S2PN-CD-P2 |
CXZN5075-S2PN-CD-P1 |
CXZN5075-S2PN-CD-P2 |
||
|
Mechanical Spec. |
Table Size (mm) |
50 X 50 | ||||
|
Travel Stroke (mm) |
50 | 75 | ||||
|
Drive Type |
Ball screw Ø8
lead 1 mm |
Ball screw Ø8
lead 2 mm |
Ball screw Ø8
lead 1 mm |
Ball screw Ø8
lead 2 mm |
||
|
Rail |
Circular Linear Ball Guiding | |||||
|
Stage Material / Surface Treatment |
Stainless Steel / Electroless Nickel Plating | |||||
|
Main Unit Weight (Kg) |
2.45 | 2.73 | ||||
|
Coupling |
FAMCS11.6-5*5 | |||||
|
Accuracy Level |
P：Precision grade | |||||
|
Wiring Method |
N：GMT Standard | |||||
|
Precision Spec. |
Resolution (Pulse) (µm) |
2 (Full)
1 (Half) |
4 (Full)
2 (Half) |
2 (Full)
1 (Half) |
4 (Full)
2 (Half) |
|
|
Max. Speed (Full Step) (mm / sec) |
20 | 40 | 20 | 40 | ||
|
Positioning Presion (µm) |
5 | 7 | ||||
|
Repeatability Precision (µm) |
± 0.5 | |||||
|
Load Capacity (Kgf) |
7 | |||||
|
Missed Step (µm) |
1 | |||||
|
Parallelism (µm) |
15 | |||||
|
Dynamic Straightness (µm) |
2 | |||||
|
Dynamic Parallelism (µm) |
10 | |||||
|
Electrical Spec. |
Motor |
Type / Shaft Numbers |
5-phase stepper
X-Axis：☐ 28 double shafts；Z-Axis：☐ 42 double shafts |
|||
|
Brand / Model |
SANYO / X-Axis：SH5281-7211；Z-Axis：103F5510-8211 | |||||
|
Driver Brand / Model |
Please refer to reference table | |||||
|
Connector |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS | ||||
|
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) | |||||
|
Sensor |
Origin Sensor |
Photoelectric sensor GMT-sensor | ||||
|
Limit Sensor |
||||||
|
Origin Approximation Sensor |
N / A | |||||
|
Power Voltage |
24V ± 10% | |||||
|
Control Output |
NPN open collector output under 24V 8mA | |||||
|
Output Control |
Testing (sensing)：output transistor OFF (closed) | |||||
| System Configuration Diagram |
| ♦ For selection of the drivers preferred, please refer to the reference table or the catalogue of Motor・Driver.
♦ All of the drivers chosed are the specification of GMT preferred. For different needs, please choose the suitable drivers according to real functional needs.
|
| Axis Definition |
| GMT has defined different axis as the following figuration according to the movement direction:
Horizontal movement direction is X and Y axis. Vertical movement direction is Z axis. Movement around X, Y, Z axis is defined to α axis, β axis, and θ axis. Green arrows present the specified axis movement direction.
|
Motor・driver Reference Table |
 |
|
|
Be the first to review “CXZN50 – Precision”
Related products
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Reviews
There are no reviews yet.