GS12-N
Liên hệ
★ 4 contact points formed by circulated ball bearings in 45 degrees contact to the guide rail surface to produce an even-loading performance of each side of the guide.
★ Circulation system is a plastic part designed to reduce friction noise during block running.
★ End and bottom seals design to prevent dust and foreign objects entering from block running, to extend product usage life.
|
Model No. |
GS12-N-N |
GS12-N-L |
|
|
Specifications |
Standard Length (mm) |
45 / 70 / 95 / 120 / 145 / 170 / 195 / 220 / 245 / 270 / 295 / 320 / 345 / 370 / 395 / 420 / 445 / 470 / 495 / 520 / 545 / 570 / 595 / 620 / 645 / 670 / 695 / 720 | |
|
Pitch (mm) |
25 | ||
|
Pitch Min. Length (P4, P5) (mm) |
4 | ||
|
Pitch Max. Length (P4, P5) (mm) |
20 | ||
|
Max. Rail Length (L3) (mm) |
2000 | ||
|
Rail Material |
Stainless Steel / Carbon Steel | ||
|
Block Type |
N：Standard Block | L：Long Block | |
|
Assembled Dimensions |
H2 (mm) |
13 | 13 |
|
W3 (mm) |
7.5 | 7.5 | |
|
Rail Dimensions |
W2 (mm) |
12 | 12 |
|
H1 (mm) |
7.5 | 7.5 | |
|
P1 (mm) |
25 | 25 | |
|
ØD x Ød x h1 (mm) |
6 x 3.5 x 4.5 | 6 x 3.5 x 4.5 | |
|
Block Dimensions |
W1 (mm) |
27 | 27 |
|
L1 (mm) |
39.4 | 51.4 | |
|
L2 (mm) |
22 | 34 | |
|
H3 (mm) |
10 | 10 | |
|
P2 (mm) |
15 | 20 | |
|
P3 (mm) |
20 | 20 | |
|
M x h2 |
M3 x 3.5 | M3 x 3.5 | |
|
Rated Loading |
C (N) |
2193 | 3078 |
|
C0 (N) |
3292 | 5349 | |
|
Static Torque |
MR (Nm) |
20.4 | 33.2 |
|
MP (Nm) |
12.3 | 28.7 | |
|
MY (Nm) |
12.3 | 28.7 | |
|
Weight |
Block (g) |
33 | 50 |
|
Rail (g/cm) |
590 | 590 | |
| Product Structure |
  |
| Product Character |
| ♦ 4 contact points formed by circulated ball bearings in 45 degrees contact to the guide rail surface to produce an even-loading performance of each side of the guide.
♦ Circulation system is a plastic part designed to reduce friction noise during block running. ♦ End and bottom seals design to prevent dust and foreign objects entering from block running, to extend product usage life. ♦ Steel balls are provided with steel wire retainers to prevent the ball falling. ♦ With stable precision control, the same type of rails could be interchanged, and keep the same smoothness, accuracy, preload, and it is also convenient for assembly and maintenance. ♦ The steel balls used in this series are all stainless steel material.
【Standard width rail】 – Fit to low profile equipment. – Stainless steel material. – High rigidity and accuracy. – Including retainer.
【Wide width rail】 – Suitable for single axis usage. – High capacity. – High rigidity and accuracy. – Stainless steel material. – Including retainer.
【Carbon steel rail】 – Economical. – Good anti-rust ability on the surface. – Same size as stainless steel series. |
| Mounting Method |
|
Be the first to review “GS12-N”
Related products
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Reviews
There are no reviews yet.