Servo Motor |
||
Model No. |
ARG200 |
|
Mechanical Spec. |
Base Size (mm) |
200 X 250 |
Table Size (mm) |
Ø 195 | |
Hollow Size (mm) |
Ø 100 | |
Travel Stroke |
360 ° | |
Drive Type |
Gear (Reduction Ratio 1 / 10) R10 | |
Rail |
Crossed-Roller Guiding | |
Stage Material / Surface Treatment |
Aluminum Alloy (Steel Countertops) / Black Anodized | |
Torque (N・m) |
21 | |
Moment of Inertia (Kg・m2) |
67089 X 10-8 | |
Max. Speed (rpm) |
110 | |
Axial Capacity (N) |
5919 | |
Deviaition Capacity (N・m) |
148 | |
Weight (Kg) |
7.88 | |
Precision Spec. |
Accuracy Level |
P:Precision Grade |
Positioning Precision |
4′ (0.0667 °) | |
Repeatability Precision |
± 15″ (± 0.004 °) | |
Missed Step |
4′ (0.0667 °) | |
Parallelism (μm) |
30 | |
Dynamic Straightness (μm) |
11 | |
Dynamic Parallelism (μm) |
11 | |
Equipped with Motor |
Servo Motor |
E90S19 (Addition Purchase) |
750 | ||
Moment of Installation:P . C . D = Ø 90
Suitable Shaft Diameter Ø 19 |
||
Stepper Motor |
T70S14 (Addition Purchase) | |
☐86 | ||
Moment of Installation:☐70
Suitable Shaft Diameter Ø 14 |
||
Origin Sensing Kit |
Sensor |
Photoelectric Sensor PM-T65 (Addition Purchase) |
Power Voltage |
20V ± 10% | |
Control Output |
NPN Open Collector Output under 20V 50mA | |
Output Control |
Testing (Sensing or not):Output Transistor OFF (Closed) | |
Shading Panel Beating |
Origin Sensing Interrupt (Addition Purchase) | |
Cable with End of a Thread |
The Length of Cable below 1m:CN14A-C1 (Addition Purchase) | |
The Length of Cable below 2m:CN14A-C2 (Addition Purchase) | ||
The Length of Cable below 3m:CN14A-C3 (Addition Purchase) | ||
The Length of Cable below 5m:CN14A-C5 (Addition Purchase) | ||
AC Servo Electrical Spec. |
AC Servo Motor |
750 W:GSVM-A08LC4 |
AC Servo Driver |
GSV-KE08MB21CP | |
Stage Side Connector |
Manufacturer:TE Connectivity
Power cord:172159-1 + 170366-1 (Male end) Encoder cable:172161-1 + 170365-1 (Male end) |
|
Controller Side Connector |
Manufacturer:KST
Power cord:E1510-RED (European Terminals) Manufacturer:JST Encoder cable:PHDR-12VS+SPHD-001T-P0.5 (Female end) |
|
Servo Motor Origin Sensing Kit |
Sensor |
Photoelectric Sensor PM-T65 (Addition Purchase) |
Power Voltage |
20V ± 10% | |
Control Output |
NPN Open Collector Output under 20V 50mA | |
Output Control |
Testing (Sensing or not):Output Transistor OFF (Closed) | |
Shading Panel Beating |
Origin Sensing Interrupt (Addition Purchase) | |
Cable with End of a Thread |
The Length of Cable below 1m:CN14A-C1 (Addition Purchase) | |
The Length of Cable below 2m:CN14A-C2 (Addition Purchase) | ||
The Length of Cable below 3m:CN14A-C3 (Addition Purchase) | ||
The Length of Cable below 5m:CN14A-C5 (Addition Purchase) |
Đánh giá
Chưa có đánh giá nào.