AYG4 – Precision – Worm & Worm Gear Drive
Liên hệ
★ Guide-Crossed-roller Guide, In structure, V-groove and crossed roller acquire movement in high accuracy and capacity by linear transmission to act a high precision movement and load capacity performance.
★ Transmission parts-Warm & Warm Gear, It transmits through the gear and is usually used in Reducer.
★ Material-Aluminum Alloy
★This product pic. shows as AYG6-75VM-3PR-CD.
★ Transmission parts-Warm & Warm Gear, It transmits through the gear and is usually used in Reducer.
★ Material-Aluminum Alloy
★This product pic. shows as AYG6-75VM-3PR-CD.
SKU: AYG4-40VM-3PR-CD
|
Model No. |
AYG4-40VM-3PR-CD |
||
|
Mechanical Spec. |
Table Size (mm) |
40 X 40 | |
|
Travel Stroke (°) |
Upper Axis：± 8
Lower Axis：± 6 |
||
|
Drive Type |
Upper Axis：Worm & Worm Gear (Ratio 1 / 240)
Lower Axis：Worm & Worm Gear (Ratio 1 / 335) |
||
|
Rail |
Crossed Roller Guiding | ||
|
Stage Material / Surface Treatment |
Aluminum Alloy / Black Anodized | ||
|
Main Unit Weight (Kg) |
0.82 | ||
|
Coupling |
FAMMS12-3*5 | ||
|
Accuracy Level |
P：Precision grade | ||
|
Wiring Method |
R：Right Wiring / L：Left Wiring | ||
|
Precision Spec. |
Resolution (Pulse) (°) |
Upper Axis：≒ 0.003 (Full)；≒ 0.0015 (Half)
Lower Axis：≒ 0.0021 (Full)；≒ 0.00105 (Half) |
|
|
Max. Speed (Full Step) (° / sec) |
Upper Axis：15
Lower Axis：10.75 |
||
|
Repeatability Precision (°) |
Follow each single axis precision | ||
|
Load Capacity (Kgf) |
2.5 | ||
|
Missed Step (°) |
0.01 | ||
|
Dynamic Straightness (mm) |
40 ± 0.3 | ||
|
Dynamic Parallelism (mm) |
0.02 | ||
|
Electrical Spec. |
Motor |
Type / Shaft Numbers |
5-phase stepper / ☐ 28 double shafts |
|
Brand / Model |
SANYO / SH5281-7211 | ||
|
Driver Brand / Model |
Please refer to reference table | ||
|
Connector |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS | |
|
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) | ||
|
Sensor |
Origin Sensor |
Photoelectric sensor GMT-sensor | |
|
Limit Sensor |
|||
|
Origin Approximation Sensor |
N / A | ||
|
Power Voltage |
24V ± 10% | ||
|
Control Output |
NPN open collector output under 24V 8mA | ||
|
Output Control |
Testing (sensing)：output transistor OFF (closed) | ||
| System Configuration Diagram |
| ♦ For selection of the drivers preferred, please refer to the reference table or the catalogue of Motor・Driver.
♦ All of the drivers chosed are the specification of GMT preferred. For different needs, please choose the suitable drivers according to real functional needs.
|
| Axis Definition |
| GMT has defined different axis as the following figuration according to the movement direction:
Horizontal movement direction is X and Y axis. Vertical movement direction is Z axis. Movement around X, Y, Z axis is defined to α axis, β axis, and θ axis. Green arrows present the specified axis movement direction.
|
Motor・driver Reference Table |
 |
|
|
Be the first to review “AYG4 – Precision – Worm & Worm Gear Drive”
Related products
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Reviews
There are no reviews yet.