AZ70-HP – Hi-Resolution Precision
★ Guide-Crossed-roller Guide, In structure, V-groove and crossed roller acquire movement in high accuracy and capacity by linear transmission to act a high precision movement and load capacity performance.
★ Transmission Parts-Ball screw, It transmits through the ball involving in the locknut and screw to reach the accuracy and longer operation lifetime.
★ Material-Aluminum Alloy, Stainless Steel
★This product pic. shows as AZ70-A6HPR-HD.
|
Model No. |
AZ70-A6HPR-HD |
||
|
Mechanical Spec. |
Table Size (mm) |
70 X 75 | |
|
Travel Stroke (mm) |
4 | ||
|
Drive Type |
Ball screw Ø8, lead 1mm, Slide wedge | ||
|
Rail |
Anti-creep Crossed Roller Guiding | ||
|
Stage Material / Surface Treatment |
Aluminum Alloy / Black Anodized | ||
|
Main Unit Weight (Kg) |
1.09 | ||
|
Coupling |
FAMMS12-5*5 | ||
|
Accuracy Level |
HP：High Resolution grade | ||
|
Wiring Method |
R：Right Wiring / L：Left Wiring | ||
|
Precision Spec. |
Resolution (Pulse) (µm) |
0.25 (Full)；0.125 (Half) | |
|
Max. Speed (Full Step) (mm / sec) |
2.5 | ||
|
Positioning Presion (µm) |
10 | ||
|
Repeatability Precision (µm) |
± 0.5 | ||
|
Load Capacity (Kgf) |
8 | ||
|
Missed Step (µm) |
1 | ||
|
Parallelism (µm) |
30 | ||
|
Dynamic Straightness (µm) |
5 | ||
|
Dynamic Parallelism (µm) |
20 | ||
|
Electrical Spec. |
Motor |
Type / Shaft Numbers |
5-phase stepper / ☐ 42 double shafts |
|
Brand / Model |
SANYO / 103-4507-7010 | ||
|
Driver Brand / Model |
Please refer to reference table | ||
|
Connector |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS | |
|
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) | ||
|
Sensor |
Origin Sensor |
Photoelectric sensor GMT-sensor | |
|
Limit Sensor |
|||
|
Origin Approximation Sensor |
Photoelectric sensor GMT-sensor | ||
|
Power Voltage |
24V ± 10% | ||
|
Control Output |
NPN open collector output under 24V 8mA | ||
|
Output Control |
Testing (sensing)：output transistor OFF (closed) | ||
| System Configuration Diagram |
| ♦ For selection of the drivers preferred, please refer to the reference table or the catalogue of Motor・Driver.
♦ All of the drivers chosed are the specification of GMT preferred. For different needs, please choose the suitable drivers according to real functional needs.
|
| Axis Definition |
| GMT has defined different axis as the following figuration according to the movement direction:
Horizontal movement direction is X and Y axis. Vertical movement direction is Z axis. Movement around X, Y, Z axis is defined to α axis, β axis, and θ axis. Green arrows present the specified axis movement direction.
|
Motor・driver Reference Table |
 |
|
|
Be the first to review “AZ70-HP – Hi-Resolution Precision”
Related products
Reviews
There are no reviews yet.