ARH80 – Ultra Precision
Liên hệ
★Ball screw design.
★Rotary clearance is small.
★design for long-term-driving.
★wear resistance.
★Travel Stroke between ±7.5° – ±13°.
★Application: Automatic Production Line, Phone Seismic Detection, and small size panel production.
|
Model No. |
ARH80-A2OPN |
||
|
Mechanical Spec. |
Table Size (mm) |
Ø 80 | |
|
Travel Stroke (°) |
± 10 | ||
|
Drive Type |
Ball Screw | ||
|
Rail |
Deep groove ball bearing | ||
|
Stage Material / Surface Treatment |
Aluminum Alloy / Black anodized | ||
|
Accuracy Level |
OP：Ultra Precision | ||
|
Wiring Method |
N：GMT Standard | ||
|
Precision Spec. |
Resolution(Pulse) (°) |
M: 0.0009 (Full)；0.00045 (Half)
J: 0.0018 (Full)；0.0009 (Half) |
|
|
Max. Speed(Full Step) (°/sec) |
11 | ||
|
Positioning Precision (°) |
0.03 | ||
|
Repeatability Precision(°) |
± 0.003 | ||
|
Load Capacity (Kgf) |
10 | ||
|
Missed Step |
< 0.003° | ||
|
Moment Stiffness |
0.25 (“/N-cm) | ||
|
Parallelism (μm) |
30 | ||
|
Dynamic concentricity (μm) |
30 | ||
|
Dynamic Parallelism (μm) |
10 | ||
|
Electrical Spec. |
Motor |
Type / Shaft Numbers |
M: 5-phase stepper high-resolution motor / ☐28 double shafts
J: 5-phase stepper motor / ☐28 double shafts |
|
Brand / Model |
M: Orientalmotor / PK523HPMB
J: Orientalmotor / PKP523N12B |
||
|
Driver Brand / Model |
Orientalmotor / CVD Series – 5 Phase stepping motor (Additional options) | ||
|
Connector |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS | |
|
Controller Side Connector |
15-Pin female end connetor D-SUB (Additional options) / 12-Pin female end connetor HRS (Additional options) | ||
|
Sensor |
Power Voltage |
24V±10% | |
|
Control Output |
NPN open collector output under 24V 8mA | ||
|
Output Control |
Testing (sensing)：output transistor OFF (closed) | ||
| Multi-point repeated positioning accuracy |
| ♦ Accuracy measurement description
1. Unidirectional positioning accuracy: within the range of the predetermined detection stroke, starting from a starting position, moving and positioning in a certain direction sequentially, and detecting the actual ♦ Precision introduction 1. Design the GMT high-level precision inspection method to meet the precision requirements of fiber coupling and semiconductor manufacturing process.
|
.jpg)
| System Configuration Diagram |
| ♦ For detailed specifications, please read the description for the stage and connecting cable.
♦ For selection of driver, please refer to the cross-reference table for the motor/driver of the standard motorized stage or the GMT motor and driver catalog. ♦ The most preferred driver is recommended to be specified by GMT as considerations. For different needs, please choose the suitable driver based on real functional needs.
|
| Axis Definition |
| GMT has defined different axis as the following figuration according to the movement direction:
Horizontal movement direction is X and Y axis. Vertical movement direction is Z axis. Movement around X, Y, Z axis is defined to α axis, β axis, and θ axis. Green arrows present the specified axis movement direction.
|
Motor/driver |
|
Ball Screw Ø8，lead 1mm
Hãy là người đầu tiên nhận xét “ARH80 – Ultra Precision”
Sản phẩm tương tự
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Liên hệ
Đánh giá
Chưa có đánh giá nào.